Using Windows Home Server

All about Windows Home Server, the Digital Home and Security.

Installing the Grid Junction Add-In to Windows Home Server on a Friday night

with 5 comments

Equipment required:

1 Universal Power Supply (a UPS supported by Grid Junction)

1 USB cable

2 Beers (optional)

Anders Holst playing on iTunes (again optional)

I have been using the Grid Junction add-in since last year with excellent results. A new version was released Tuesday, and since I must uninstall the old version first, I thought I would walk you through the easy setup before I retire to the couch and the three episodes of Stargate Atlantis awaiting me on my DVR.

I was fortunate enough to have purchased a UPS from a national US retailer (RIP CC) that Grid Junction supported for only $29.99 on sale. If you look around at the discount websites (Techbargains, FatWallet etc.) you can find these good deals every few months. Honestly, I never thought I would use a UPS communications interface, but since USB is now the standard, it connects quite easily. This Add-In is very user-friendly.

The graphic below shows a partial list of supported UPS models:

http://www.gridjunction.com/gridjunction-supported-uninterruptible-power-supply

Supported UPS Models for Grid Junction 

The wife just hopped in the shower so I have about 20 minutes for this article. Crap. I tend to be longwinded.

My UPS unit is the pretty much the lowest model you can get with a USB interface. It can still run my WHS long enough to withstand temporary power outages and brownouts.

The coolness factor weighs in heavily for this purchase as does the manufacturer. Choose your model wisely Luke.

I bought the APC 550 (coolness factor –2.783) as shown below:

http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BE550R&tab=features

Mental Note: Next time buy a larger UPS that looks like the Death Star or at least a small RV (caravan).

APC 500

I wish I could say mine looks like that, but somehow I misread the APC installation directions and ended up with this:

APC Mess of Wires

Ok, so regardless of whatever supported UPS you have in the box next to you, it is time to start the installation. Grab that beverage.

You should have a UPS sitting on the floor awaiting installation, a cold beverage, a USB cable (probably in the UPS box) and a WHS humming in the background.

Shut your server down. Yeah, I hate those words too. Seriously you have to turn it off. Seriously. Follow the manufacturer guidelines. Do not shut down if data is copying or your backup is running. Do I really need to say that? Lather. Rinse. Repeat. Not for internal use. Seriously don’t do it.

Has the humming stopped?

I will be gentle. Trust me. Once you have the UPS installed and installed turning the system off again will not be necessary. Trust me. I promise. This will be like Prom Night. Of course I love you. The hook in the back is stuck. Does it open from the front?

Once you have everything powered off spend a few minutes and route your wiring logically so you do not end up with a mess like I have above.

Once all of your power connections has been re-established, reboot your WHS system and wait for the little green house.

I just heard the hot water turn off so I have about 15 minutes left. Crap.

Download the add-in from the website listed below:

http://www.gridjunction.com/

You will probably have to set up an account (or enter your existing login information) for the website that controls the download so be prepared to enter your login data as necessary.

Download Grid Junction

Save the file to the Software>Add-Ins folder on your server.

Add-Ins Folder in WHS

Open the WHS console and click on settings. Choose Add-Ins on the left hand column and you will see the Grid Junction Add-In. Click on “Install”. If you do not see the Add-In then you probably saved the file to the wrong folder or did not unzip the folder correctly. Spend a few minutes and reflect on the above steps.

Available Add-Ins in Windows Home Server

Once installed, the Add-In should pick up the UPS manufacturer data and list your “Battery name” correctly. You can now switch tabs between Events, Actions, Hardware, Settings and About.

Image 7

My wife is done drying her hair and this is the last Ander Holst song. I have to finish quickly.

I would suggest (without any liability) changing the Shutdown to 50%. Depending on your load and the battery size you may not have a lot of run time. My unit gives me about 3 minutes at full load.

Image 8

You are done with the Add-In. Check the About tab to ensure you have the current version of 1.4.0.0 RC

 Image 9

You have now completed the installation. Go and get that second beverage (I wish I had the small fridge) and marvel at your power.

If you need real installation instructions you can find them at http://www.gridjunction.com/

See you next Friday.

Advertisements

Written by Timothy Daleo

March 7, 2009 at 10:36 pm

5 Responses

Subscribe to comments with RSS.

  1. This has got to be the best thing I have read all week =)

    The latest supported UPS list is now found here:

    http://www.homeserverland.com/wikis/gridjunction/supported-uninterruptible-power-supply.aspx

    Thank you

    Alexander Kent

    March 8, 2009 at 3:55 am

  2. […] See original here:  Installing the Grid Junction Add-In on a Friday night « Using … […]

  3. now in my rss reader)))
    ————————
    signature: http://werato.ru/

    NoutleNatte

    March 10, 2009 at 7:10 am

  4. […] . And so, here is the list: Technology Utilize systems, search engines, software and hardware Installing the Grid Junction Add-In on a Friday night – whsbook.wordpress.com 03/07/2009 Equipment required: 1 Universal Power Supply (a UPS supported by […]


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: